| Spec | Description |
|---|---|
| S1 | Command calibration (see below) |
| S2 | Point calibration (64 ≥ point ≥ 1) |
| 1 | Disable point |
| 2 | Disable slave |
| 3 | Complete thermocouple |
| 4 | External thermocouple (0 millivolts) |
| 5 | External thermocouple (80 or 100 millivolts) |
| 6 | External point thermocouple (0 millivolts) |
| 7 | External point thermocouple (80 or 100 millivolts) |
| 8 | RTD external point (100 ohm) |
| 9 | RTD external point (400 ohm) |
| 10 | Enable point |
| 11 | Enable slave |
| 12 | Escape/reset calibration logic |
| Block | Type | Description |
|---|---|---|
| 80 | Real | No output |